### Author Topic: Shotgun Ballistic Calculator  (Read 1443 times)

#### gvp

• Newbie
• Posts: 17
##### Shotgun Ballistic Calculator
« on: December 21, 2020, 01:15:46 AM »
I've made a very simple excel file in order to calculate Velocity, Energy and TOF for shotgun BB's.
1. What is the BB's ballistic coefficient ? Can it be calculated ?
2. Any idea how to make this simple excel file more reliable according to atmospheric conditions and the subsonic, transonic and supersonic region ?

Bill
« Last Edit: December 21, 2020, 03:32:24 PM by gvp »

• Full Member
• Posts: 238
##### Re: Shotgun Ballistic Calculator
« Reply #1 on: February 09, 2021, 10:49:05 AM »
I couldn't resist googling. Since 2008 some scientific papers were produced on the matter. https://www.sciencedirect.com/science/article/pii/S2214914717301459 has an interesting one which I quickly scanned
you can use it to check your table.
Next posts on the bc calculation
« Last Edit: February 10, 2021, 03:10:40 PM by admin »

• Full Member
• Posts: 238
##### Re: Shotgun Ballistic Calculator
« Reply #2 on: February 10, 2021, 03:01:36 PM »
I have (re)done the research.

The ballistic coefficient is computed from m/(d*d) where m is the mass of the pellet in lb and d its diameter in inch

or bc = density*pi*d/6

density steel = between 0.280 and 0.291 lb/in^3
The drag function to use is "GS" in bfx which matches the one in the above link

« Last Edit: February 10, 2021, 03:09:18 PM by admin »

• Full Member
• Posts: 238
##### Re: Shotgun Ballistic Calculator
« Reply #3 on: February 10, 2021, 03:07:15 PM »
e.g.  .50 round lead ball bc= 0.107 lb/in^2